Author Topic: Can't Flash Program to Kilobots over OHC  (Read 3070 times)

Shadyoatef

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
Can't Flash Program to Kilobots over OHC
« on: November 22, 2016, 06:39:12 AM »
Kilobots responds to all the commands from the Kilo Controller except flashing the programs..
I use the online compiler to compile and download the hex file to Flash.

When I click the Flash button, a cmd pops up for 1 second or less and nothing happens and the robot still has the old program.

kteam

  • Administrator
  • Hero Member
  • *****
  • Posts: 378
  • Karma: +7/-1
Re: Can't Flash Program to Kilobots over OHC
« Reply #1 on: December 07, 2016, 08:33:44 AM »
Hello,

it is certainly the OHC which is not correctly installed on your computer. Please look at the device manager and see if the AVRispMKII is recognize when plugging the OHC. If not, try to install AVRstudio, it will install the driver at the same time.

best regards