Author Topic: Sensors Not working  (Read 473 times)

Imtiaz.a26

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
Sensors Not working
« on: April 29, 2017, 10:12:48 AM »
Everything was working fine 1 week ago but since past few days sensors are not returning any value
When i run this command i get output 0,0,0,0
Code: [Select]
root@korebot2:~/Programs$ ./battery
$BATTERY,0,0.0000,0.0000,0.0000,0.0000,0.0000,0.0000


And in dmesg command i am getting this error
Code: [Select]
<6>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
<4>libertas: 00:0e:8e:13:48:fd, fw 5.0.16p0, cap 0x00000303
<6>libertas: unidentified region code; using the default (USA)
<6>libertas: eth0: Marvell WLAN 802.11 adapter
<6>I2C: i2c-0: PXA I2C adapter
<6>I2C: i2c-1: PXA I2C adapter
<6>i2c /dev entries driver
<4>i2c: error: exhausted retries
<4>i2c: msg_num: 0 msg_idx: -2000 msg_ptr: 0
<4>i2c: ICR: 000007e0 ISR: 00000002
<4>i2c: log: [00000446:000007e0]
<4>i2c: error: exhausted retries
<4>i2c: msg_num: 0 msg_idx: -2000 msg_ptr: 0
<4>i2c: ICR: 000007e0 ISR: 00000002
<4>i2c: log: [00000446:000007e0]
<4>i2c: error: exhausted retries
<4>i2c: msg_num: 0 msg_idx: -2000 msg_ptr: 0
<4>i2c: ICR: 000007e0 ISR: 00000002
<4>i2c: log: [00000446:000007e0]
<4>i2c: error: exhausted retries
<4>i2c: msg_num: 0 msg_idx: -2000 msg_ptr: 0
<4>i2c: ICR: 000007e0 ISR: 00000002
<4>i2c: log: [00000446:000007e0]
<4>i2c: error: exhausted retries
<4>i2c: msg_num: 0 msg_idx: -2000 msg_ptr: 0
<4>i2c: ICR: 000007e0 ISR: 00000002
<4>i2c: log: [00000446:000007e0]
<4>i2c: error: exhausted retries
<4>i2c: msg_num: 0 msg_idx: -2000 msg_ptr: 0
<4>i2c: ICR: 000007e0 ISR: 00000002
<4>i2c: log: [00000446:000007e0]
root@korebot2:~/Programs$

kteam

  • Administrator
  • Hero Member
  • *****
  • Posts: 375
  • Karma: +7/-1
Re: Sensors Not working
« Reply #1 on: May 08, 2017, 08:24:10 AM »
Hello,

this problem happen when the main dsPIC did not respond any more to the KoreBotII.
Please contact K-team for more instructions.

Best regards