KoreBot II
| Introduction | Specifications | Manuals / Downloads | Distributors |
Specifications
| Elements | Technical Information |
|---|---|
| Processor | Intel XSCALE PXA-270 @ 600MHz |
| RAM | 128 MBytes |
| FLASH | 32 MBytes |
| Power Supply | Input: 5VOutput: Embedded power regulation for Compact Flash, and other 3.3V extensions... |
| Power Consumption | Idle: 500mWMax: 1200mW |
| Connectors | 1 x Compact Flash Type I socket 1 x uSD socket1 x KB-250 Interface (2x50-pin, see below) 2 x RS232 (KoreConnect needed) 1 x USB Host (mini USB connector) 1 x Gumstix extension connector |
| KB-250 Interface | 3x Serial RS332 (including Bluetooth compatible port)3x USB Master port (to connect USB camera)1x MMC controller (MutiMedia Card)1x LCD controller1x I2C bus (400kb/s)1x SSP/SPI bus (1.8Mb/s)1x AC97 sound controller2 x PWM pins53 x GPIO pins (if not used for above features) |
| OS Support | Linux 2.6.x (OpenEmbedded Ansgtröm Distribution) |
| License | GPL license on boot loader. |
| KoreBot Platform Package | System bootloader in executable format. GNU-Linux Development Based Environment. |
| Optional Extensions | KoreMotor drive up 4 DC motors. KoreConnect (Easier connection to RS232 ports and USB Client). KoreJTAG (JTAG to USB interface, credits to S. Gerlach). KoreUSBCam (USB Camera module) KoreIO (Analog I/O, digtal out, servo control). KoreWifi |
| Size | 85mm x 57mm x 33 mm |
| Weight | 52g |
KoreBot II Standard Connectivity
KoreBot II provides an embedded USB Host to allow the connection of any USB device directly to board. Such a feature allows the connection of standard:
- USB video camera
- Keyboard & mouse
- USB storage
- PDAs
- etc ...
- Wireless Ethernet card
- Bluetooth card
- Flash Storage card
- etc ...